CCNA Training in Hyderabad | CCNA Training Institute in Hyderabad | CCNA Online Training

CCNA Course Content:

Cisco Certified Network Associate Training

Network Fundamentals

• Compare and contrast OSI and TCP/IP models
• Compare and contrast TCP and UDP protocols
• Describe the impact of infrastructure components in an enterprise network

• Firewalls
• Access points
• Wireless controllers
• Traffic path to internal and external cloud services
• Virtual services
• Basic virtual network infrastructure
• Star
• Mesh
• Hybrid
• Perform and document fault isolation
• Resolve or escalate
• Verify and monitor resolution
• Unicast
• Broadcast
• Multicast

• Describe the effects of cloud resources on enterprise network architecture

• Compare and contrast collapsed core and three-tier architectures
• Compare and contrast network topologies

• Select the appropriate cabling type based on implementation requirements
• Apply troubleshooting methodologies to resolve problems

• Configure, verify, and troubleshoot IPv4 addressing and subnetting
• Compare and contrast IPv4 address types

• Describe the need for private IPv4 addressing
• Identify the appropriate IPv6 addressing scheme to satisfy addressing requirements in a LAN/WAN environment
• Configure, verify, and troubleshoot IPv6 addressing
• Configure and verify IPv6 Stateless Address Auto Configuration

• Compare and contrast IPv6 address types

• Global unicast
• Unique local
• Link local
• Multicast
• Modified EUI 64
• Autoconfiguration
• Anycast

LAN Switching Technologies

• Describe and verify switching concepts

• MAC learning and aging
• Frame switching
• Frame flooding
• MAC address table
• Access ports (data and voice)
• Default VLAN
• Trunk ports
• Add and remove VLANs on a trunk
• DTP, VTP (v1&v2), and 802.1Q
• Native VLAN
• STP mode (PVST+ and RPVST+)
• STP root bridge selection
• PortFast
• BPDU guard
• Cisco Discovery Protocol
• LLDP
• Static
• PAGP
• LACP

• Interpret Ethernet frame format
• Troubleshoot interface and cable issues (collisions, errors, duplex, speed)
• Configure, verify, and troubleshoot VLANs (normal/extended range) spanning multiple switches

• Configure, verify, and troubleshoot interswitch connectivity

• Configure, verify, and troubleshoot STP protocols

• Configure, verify and troubleshoot STP related optional features

• Configure and verify Layer 2 protocols

•     Configure, verify, and troubleshoot (Layer 2/Layer 3) Ether Channel

•  Describe the benefits of switch stacking and chassis aggregation

Routing Technologies

• Describe the routing concepts

• Packet handling along the path through a network
• Forwarding decision based on route lookup
• Frame rewrite
• Prefix
• Network mask
• Next hop
• Routing protocol code
• Administrative distance
• Metric
• Gateway of last resort
• Admin distance
• Router on a stick
• SVI
• Default route
• Network route
• Host route
• Floating static

• Interpret the components of a routing table

• Describe how a routing table is populated by different routing information sources

• Configure, verify, and troubleshoot inter-VLAN routing

• Compare and contrast static routing and dynamic routing
• Compare and contrast distance vector and link state routing protocols
• Compare and contrast interior and exterior routing protocols
• Configure, verify, and troubleshoot IPv4 and IPv6 static routing

• Configure, verify, and troubleshoot single area and multi-area OSPFv2 for IPv4 (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)
• Configure, verify, and troubleshoot single area and multi-area OSPFv3 for IPv6 (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)
• Configure, verify, and troubleshoot EIGRP for IPv4 (excluding authentication, filtering, manual summarization, redistribution, stub)
• Configure, verify, and troubleshoot EIGRP for IPv6 (excluding authentication, filtering, manual summarization, redistribution, stub)

•  Configure, verify, and troubleshoot RIPv2 for IPv4 (excluding authentication, filtering, manual                                                                                                 summarization, redistribution)
• Troubleshoot basic Layer 3 end-to-end connectivity issues

WAN Technologies

• Configure and verify PPP and MLPPP on WAN interfaces using local authentication
• Configure, verify, and troubleshoot PPPoE client-side interfaces using local authentication
• Configure, verify, and troubleshoot GRE tunnel connectivity
• Describe WAN topology options

• Point-to-point
• Hub and spoke
• Full mesh
• Single vs dual-homed
• MPLS
• Metro Ethernet
• Broadband PPPoE
• Internet VPN (DMVPN, site-to-site VPN, client VPN)
• Marking
• Device trust
• Prioritization
• Voice
• Video
• Data
• Shaping
• Policing
• Congestion management

•  Describe WAN access connectivity options

• Configure and verify single-homed branch connectivity using eBGP IPv4 (limited to peering                        and route advertisement using Network command only)
• Describe basic QoS concepts

Infrastructure Services

• Describe DNS lookup operation
• Troubleshoot client connectivity issues involving DNS
• Configure and verify DHCP on a router (excluding static reservations)

• Server
• Relay
• Client
• TFTP, DNS, and gateway options
• Priority
• Preemption
• Version
• Static
• Pool
• PAT

• Troubleshoot client- and router-based DHCP connectivity issues
• Configure, verify, and troubleshoot basic HSRP

• Configure, verify, and troubleshoot inside source NAT

•    Configure and verify NTP operating in a client/server mode

Infrastructure Security

• Configure, verify, and troubleshoot port security

• Static
• Dynamic
• Sticky
• Max MAC addresses
• Violation actions
• Err- disable recovery
• 802.1x
• DHCP snooping
• Nondefault native VLAN
• Standard
• Extended
• Named
• Local authentication
• Secure password
• Access to device
• Source address
• Telnet/SSH
• Login banner

• Describe common access layer threat mitigation techniques

• Configure, verify, and troubleshoot IPv4 and IPv6 access list for traffic filtering

•   Verify ACLs using the APIC-EM Path Trace ACL Analysis tool
•   Configure, verify, and troubleshoot basic device hardening

• Describe device security using AAA with TACACS+ and RADIUS

Infrastructure Management

• Configure and verify device-monitoring protocols

• NMPv2
• SNMPv3
• Syslog
• Backup and restore device configuration
• Using Cisco Discovery Protocol or LLDP for device discovery
• Licensing
• Logging
• Timezone
• Loopback
• Cisco IOS upgrades and recovery (SCP, FTP, TFTP, and MD5 verify)
• Password recovery and configuration register
• File system management
• Ping and trace route with extended option
• Terminal monitor
• Log events
• Local SPAN
• Function of a controller
• Separation of control plane and data plane
• Northbound and southbound APIs

• Troubleshoot network connectivity issues using ICMP echo-based IP SLA
• Configure and verify device management

• Configure and verify initial device configuration
• Perform device maintenance

•  Use Cisco IOS tools to troubleshoot and resolve problems

• Describe network programmability in enterprise network architecture

CCNA Training in Hyderabad | CCNA Training Institute in Hyderabad | CCNA Online Training